Here we will know step-by-step process to now do setup the NETGEAR Trek travel router as a wireless AP (access point) for your home /set-up.
To configure the PR2000 of routerlogin.net:
- Link one bottom of an Ethernet cable to the PR2000 Internet/LANport (Blue port) and the next to a working internet source.
Then go to the switch on the side of the PR2000 to the wired location.
- Socket the PR2000 into a wall passage and wait at least for 25 seconds.
Note: You can also provide power to the PR2000 through micro USB port.
- Then link your device to the PR2000 just through wired or wireless:
If you are now making use of a wired computer, then ensure that it is firmly plugged into the LAN cable (the Yellow cable) of the PR2000.
If you make use a wireless laptop or wireless device you can image for available Wi-Fi networks and search for the PR2000 default wireless network term (SSID) and link to it by entering its default password (Network Key). The PR2000 default wireless network term and password can be created on the label another to its serial number and MAC address.
As from your computer or smart tool, you need to open a web browser and type in routerlogin.net
http://www.routerlogin.com or http://192.168.168.1 into the right address bar.
If impelled to access, enter in admin for username and password in the password space.
From the Basic option, go to Internet.
On the majorarea of the page, choose Enable AP Mode and to save a name for profile. Also write in a name you choose.
Next go to Apply to save the variations.